Thu, Dec 14, 2017
youtube Twitter Facebook

SCC & SCS Straight and Curved Slat Conveyors

SCC & SCS Straight and Curved Slat Conveyors

Features

SCS slat conveyors are manufactured to satisfy the requirements of the food and beverage industry, and are available in stainless steel 304 or painted steel.

The return strand of the conveyor runs inside the conveyor body, and is supported by return rollers.

The SCC curved slat conveyors are attached to straight sections to obtain L, S or U-shaped curves.

SCC & SCS Straight and Curved Slat Conveyors

Characteristics

The drive unit is positioned at the end of the conveyor, and a transition cover protects personnel from injury.

The slats run on a wear resistant strip of UHMWPE for extended operation and reliability.

The side channels are punched at regular intervals to accommodate guide rails and support brackets.

The SCS and SCC family uses special beam supports that can compensate for irregular flooring.

Chains are either stainless steel or plastic (polyacetal), straight or side-flexing in case of curved slat conveyors.

SCC & SCS Straight and Curved Slat Conveyors

Applications

SCS Slat conveyors are used mainly for transporting bottles, jars, cans, and similar containers in the food, confectionary and beverage industry.

They are also used to transport small items and cartons.

 

SCC & SCS Straight and Curved Slat Conveyors

SCC & SCS Specifications

SCC & SCS Straight and Curved Slat Conveyors

Specifications
Loading Capacity 1600 N to 2550 N Maximum Slat Tension
Head Pulley Diameter 154.18 mm. [25 tooth]
Return Strand support Slat supported by wear-strip along whole length
Linear Speed 22 m/min
Mains Supply 380 VAC +/-10%, 50 Hz 3 Phase
Motor Power 0.37 kW ~ 1.5 kW depending on length, linear speed and load.
Motor Class IP54
Insulation Class IP54
Slat Materials Stainless Steel , Polyacetal
Finish Stainless Steel 304 or 316 on demand. Electrostatic Epoxy Powder RAL 7035
Dimensions
Standard Width (W) / Preferred Values
Outer Distance (Wo)
W 82.5 mm ( 3.25" ) 114.3 mm ( 4.5" ) 190.5 mm ( 7.5" )
Wo 98 mm 129.8 mm 206 mm
 
Standard Section Length
2450
The SCS family's Side Channels, are made in modules of 2450 mm length. Standard Section Lengths can be combined to obtain the nearest required length.
Modules are attached together using Butt Couplings, to obtain any desired length.

 

OptionsAccessories
Floor Supports bipods or tripods Yes Guard Rails and Guides: Tubular or Plastic Profiles
Special Supports designed on request Yes End Stops
Ceiling Hangers No Pushers
Wall Mount No Transfer Points and Transfer Plates
Left or Right Side Drive Yes Optical Switches and Controls
Variable Speed Drives Yes Push Button Station
Stainless Steel Construction 304 / 316 / Painted steel Yes  

 

Contact Us

Factory
New Borg El Arab,Second Industrial Zone,
Entrance 2C,Street3,Alexandria,Egypt
Phone
+20-(0)3-462 4126         +20-(0)3-462 4070
+20-(0)3-462 4424         +20-(0)3-462 4127
Fax
+20-(0)3-462 4291



Cairo Office
Corniche El Nile,Maadi,Cairo
Phone
+20-(0)2-252 66 333
Fax
+20-(0)2-252 64 888
Mail Us
This email address is being protected from spambots. You need JavaScript enabled to view it.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Top Events

Newsletter

Subscribe to our Newsletter
captcha